OPS245 Prep

Virtualized Operating Systems

In OPS245 you'll set up your own Linux workstation and your own Linux servers. Linux is a serious operating system, and for the best learning experience it would be best if you had the workstation running on bare metal. But since we don't have a lot of time together in person, and everyone's computer is different: the notes on this wiki will assume that you have all your Linux installations in virtual machines.

A guest operating system (the one you install in a virtual machine) is installed the same way as it would be on real hardware. In fact the OS you're installing is mostly unaware that it isn't being installed on real hardware. To make this possible: the host operating system runs a piece of software called a hypervisor. There are many popular ones (you may have used Vmware in other courses) - we are going to use VirtualBox in this course.

The guest operating system send countless requests to its (virtual) hardware, e.g.: to the CPU, the RAM, the video card, network card, sound cards, etc. The hypervisor's job is to provide simulated hardware to the guests, while passing the guest's requests to the real hardware.

Hardware Requirements

The concept of virtualized operating systems has been around for many decades, but only in the last couple of decades the technology has become accessible to the masses. These days just about every PC you can buy will come with a processor supporting virtualization (AMD and Intel CPUs have different technologies but they work equally well).

But there are many other things that are not "just about every PC". A tablet is not a PC, neither is an Apple laptop or desktop. The official hardware requirement for the course is that you have:

• A PC with virtualization capabilities (either AMD or Intel)
• With 16GB of RAM
• With at least 120GB of free space on an SSD (an external drive is not required, but may be useful depending on how you work)

Enable Virtualisation

For some reason the majority of computers are sold with their virtualisation capabilities turned off by default. If you haven't done this already (perhaps for another course):

1. Reboot your machine,
2. Press the appropriate key to get to the BIOS settings (technically it's not BIOS any more but let's not argue about that now),
3. Find the setting to enable CPU virtualisation and make sure it's enabled.

Unfortunately steps 2 and 3 are done differently on different machines.

The key you need to press might be Delete, F10, F12, Escape, or something different. Usually there's a message as your machine boots that says something like "Press X to enter setup".

The setting you need to change isn't just different between AMD and Intel CPUs: it has different names for different motherboard manufacturers and models. So you'll have to figure out what it is for you. I've done this a hundred times and I still struggle finding it on one of my desktops because its extra confusing name and location.

Workstation Setup

Your job for this week is to set up your workstation. We'll use Linux Mint as a workstation in this course. Download the latest Cinnamon release from httpsc://www.linuxmint.com/

Linux installations have become so easy - it barely takes any effort. Do poke around the installer to find things you're not familiar with. Remember that the reason you're going to school is to learn stuff. Linux Mint has a pleasant and fast user interface, but I can't force you to install it on bare hardware on your laptop, so the instructions are built on the assumption that you're installing it as a VirtualBox VM.

Using Vmware is not recommended
Technically you can do the entire course in Vmware instead of VirtualBox, but you'll be deviating from the instructions and you might end up with big headaches related to licencing. Since you no longer automatically get a Vmware licence as a student: if you insist on using it you have to make real sure that it will continue to work until the end of the course.

• Start VirtualBox and click "New".
• Set workstation as the name.
• Choose a folder where you'll store the VM's virtual hard drive. If you're using your laptop: you can store it anywhere. If you're using a removable drive: store it in any folder you like on the removable drive.
• Pick Ubuntu (64 bit) as the Linux version. Linux Mint is based on Ubuntu, so it's almost the same thing.
• Give it at least 4GB of memory, more if you can afford it. Up to 8GB will be worth it if you run Firefox in it with lots of tabs open. Keep in mind that in later labs you will have more VMs to run at the same time. The host and each VM need its own RAM allocated. The total is limited by the size of your physical memory.
• Create a virtual hard drive at least 30GB in size. The default VDI type is fine. A dynamically allocated disk is fantastic and I haven't found it to be any slower than a preallocated ('fixed size') virtual drive.
• You can pick the Linux Mint .iso file before you start the VM, or right after the first time you start it.

The right control key will release the mouse pointer from the VirtualBox window if you need to do something in your host operating system.

Once your VM boots from the ISO file: you can use it, but it is not yet installed. At this point it's running purely from RAM, and any files you create or change will be stored in RAM, which is a volatile type of memory. All your changes will be lost as soon as you power off the virtual machine.

• Start the installer. The icon to do that is on the desktop.
• For keyboard layout you almost certainly want English (US) - that's the type of keyboards they sell in Canada. You can add other language input after the installation is complete if you want to.
• Do install the extra multimedia codecs. It's giving you the default option not to install them because the legal status of some of them is not 100% clear. You and I (being nobodys) can install these without any worries about getting sued.
• On the "Installation type" screen (this screen is really about partitioning and installation destination) leave the "Erase disk..." radio button picked and click the "Advanced features" button. Choose "Use LVM" in the list that pops up.
• Create a user with the same username as your Seneca username. That will make some things easier later.
• Name your computer "workstation". This will be configured as your hostname.
• Wait for the installation to complete.
• When it's done and you reboot - it will ask you to remove the installation media. That's your ISO file which is used as a virtual DVD, and it has already been ejected for you.

That's all it took: your instllation is complete.

Customize your workstation

If you're going to use this VM a lot (and you should): make it comfortable for yourself to use. This section has suggestions which might help, you don't need to do any of this if you don't want to.

• Install guest additions to get the screen to resize as the VM window resizes.
• If the above didn't work: In the main menu you can find the "Display" settings. Pick the largest resolution that will fit on your screen. For example on my 1920x1080 laptop screen: the workstation VM window fits just fine when it's configured to use 1152x864 pixels.
• I don't like having icons showing in my taskbar if those applications aren't running, so I unpin them. Don't need the "Show desktop" button either.
• Right-clicking on the taskbar, "Applets" I change the following for the "Grouped window list":
  • Don't group windows.
  • Button label: Window title
• In "System Settings":
  • Screensaver:
    • Don't start it automatically.
    • Don't lock the computer when it goes to sleep or the screensaver starts.
  • Startup applications, uncheck:
    • Blueman
    • Mint welcome screen
    • Nvidia Prime support
    • Update Manager
  • Change the desktop background.
  • Under "Windows": check "Attach dialog windows to the parent window".
  • Under "Themes/Settings": Do not user overlay scroll bars.
  • Under "Sound/Sounds": Uncheck at least the starting/leaving sounds.
• Click the "System reports" button in the bottom right system tray, and ignore the two reports there (language packs and system restore utility).
• yum install vim so the arrow keys don't do crazy things
• Change this line in /etc/sudoers: %sudo    ALL=NOPASSWD: ALL